MONSTERMOUNT MB-1003, Installation Instructions Manual

Page: 6 / 16

ENG
6
STEP 3
Final Assembly
1. Make sure safety device is unlocked. If locked,
simply pull down on the cord until you hear a click.
2. Carefully slide the mount with your display
attached into the wall plate (see Fig. 6).
Do not
release the display until the display plate is
securely placed on the wall plate
.
3. Pull down on the cord until you hear a click to
lock the mount to the wall plate.
IMPORTANT! The mount must be in the locked
position at all times to prevent the display from
being accidentally lifted from the wall plate.
Operation and Adjustment
1. To adjust the tilt angle, hold the display firmly in place while pulling down on
the white cord. Carefully allow the display to move to the lowest position before
releasing the cord. The display can be left in the lowest position or pushed into
one of three additional tilt positions as desired.
2. Periodically clean your mount with a dry cloth. Inspect all screws and hard-
ware at regular intervals to ensure that no connections have become loose over
time. Retighten as needed.
Fig. 6