MONSTERMOUNT MB-1003, Installation Instructions Manual

Page: 3 / 16

ENG
3
STEP 1A
Mounting to the Wall (Drywall)
IMPORTANT! For safety reasons, this mount must be secured to a wood stud
capable of supporting the combined weight of the mount and display. Do not
mount to drywall alone.
1. Use a high quality stud finder to locate a stud where you wish to install your
mount. Mark both edges of the stud to help identify the exact center.
NOTE: You must use the center of the stud to avoid cracking or splitting the
wood during installation.
2. Place the wall plate against the wall over the marked stud. Make sure it is
level.
3. Mark the two locations for securing the wall plate and set the wall plate aside
(see Fig. 1).
4. Drill a 3 mm (1/8”) pilot hole at each marked location.
5. Place the wall plate back against the wall and attach it using the drywall
screws (A) provided (see Fig. 2).
Do not over-tighten these screws. Ensure
that the wall plate remains level after both screws are secured.
Fig. 1
Fig. 2