MONSTERMOUNT MB-1003, Installation Instructions Manual

Page: 2 / 16

ENG
2
Hardware Kit
We thank you for choosing Monster Mount production, which will help
you to solve problems of accommodation of home appliances effec-
tively. Monster Mount offers a full spectrum of highquality wall, ceiling,
floor mounts, which will stylishly supplement your house.
Safety Warning
1. Make sure these instructions are read and thoroughly understood before
attempting installation. If you are unsure of any part of this installation, contact
a professional installer for assistance.
2. The wall or mounting surface must be capable of supporting the combined
weight of the mount and the display; otherwise the structure must be rein-
forced.
3. Safety gear and proper tools must be used. Failure to do so can result in prop-
erty damage and/or serious injury. A minimum of two people are required for this
installation. Do not attempt to install this mount alone under any circumstance.
4. Follow all instructions and recommendations regarding adequate ventilation
and suitable locations for mounting your display. Consult the owner‘s manual
for your display for more information.
Specifications
Display Size: 15–27" (38–69 см)
Profile: 1.6” (4.0 cm)
Mounting Pattern: 75 mm x 75 mm and 100 mm x 100 mm
Maximum Load: 11 kg (25 lbs)
Tilt Range: up to 20.0° down
Box Contents
Mount (x1) Instruction Manual (x1)
Wall Plate (x1) Hardware Kit (x1)
Required Tools
Head Screw Driver, Electric or Portable Drill, 3 mm (1/8”) Drill Bit and Stud
Finder for Drywall Installation, 8 mm (5/16”) Masonry Bit for Concrete
Installation, Level.