5
This device uses a grounded power cord and requires a ground connection for safe
operation. Ensure that the power source has a proper ground connection. Do not
modify the plug or use a "cheater" plug to bypass the ground connection.
Unplug this device from the power source when not in use.
Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that the
power cord does not present a tripping hazard.
Never unplug the unit by pulling on the power cord. Always grasp the connector
head or adapter body.
Use only in a well-ventilated area. Do not use in close, confined spaces.
Take care when using a scraper to remove a model. Never direct the scraper
towards your fingers or body.
The printer is designed to operate with an ambient temperature ranging from +41°F
(+5°C) to +104°F (+40°C). Printing outside these limits may result in low quality
prints.
Use eye protection when cleaning or sanding the printed models to avoid getting
small particles in your eyes.
INTRODUCTION
Thank you for purchasing this Maker Ultimate 2 3D Printer! This printer uses the FFF (Fused
Filament Fabrication) method of printing. It features a metal frame, fully enclosed
structure, and heated build platform. It can print 1.75mm ABS, PLA, metal fill, wood fill, and
other filament types with melting points below 250°C. It has a 200 x 150 x 150 mm print
area and can print at speeds up to 150mm/sec. It can print from a computer using a USB
connection or from sliced gcode files stored on a microSD™ card. It supports auto leveling,
has a removable and a heated glass build plate.
