8
TRANSMITTER (TX) MODE OPERATION
Bluetooth Pairing (TX)
Perform the following steps to pair the transmitter with a Bluetooth® device, such as
headphones or a speaker.
1.
If the unit is powered on, press and hold the POWER button for about 2 seconds to
turn it off. The LED will flash red twice.
2.
Wait at least 3 seconds, then slide the TX/RX switch to the TX position.
3.
Press and hold the POWER button for about 2 seconds to turn the unit on. The LED
will flash blue twice.
4.
Momentarily press the PAIR button. The LED will begin rapidly flashing blue,
indicating that the unit is in Bluetooth pairing mode in TX mode.
5.
Turn on your Bluetooth device and put it into pairing mode. The two devices will
pair and connect within 5-30 seconds. Once connected, the LED will begin to slowly
blink blue.
6.
Connect your audio source device, such as an mp3 player, to the transmitter using
either the included 3.5mm audio cable or the included S/PDIF digital optical cable. If
using an S/PDIF cable, use the SPDIF TX input.
Multipoint Pairing (TX)
Perform the following steps to pair the transmitter with a two Bluetooth® devices, such as
headphones or speakers.
1.
If you have not already paired a single device, perform the steps in the
Bluetooth
Pairing (TX) section above to pair the first device.
2.
Momentarily press the PAIR button. The LED will rapidly flash blue, indicating that
the transmitter is in Bluetooth pairing mode.
3.
Turn on your Bluetooth device and put it into pairing mode. The two devices will
pair and connect within 5-30 seconds. Once connected, the LED will illuminate solid