background image

SAFETY WARNINGS AND GUIDELINES 

Please read this entire manual before using this device, paying extra attention to these 
safety warnings and guidelines. Please keep this manual in a safe place for future reference. 

 

This device is intended for indoor use only. 

 

Do not expose this device to water or moisture of any kind. Do not place drinks or 
other containers with moisture on or near the device. If moisture does get in or on 
the device, immediately turn it off and allow it to fully dry before turning it back on. 
If plugged into a USB charging source, unplug it. 

 

Do not touch the device or any connected cables with wet hands. 

 

Do not expose this device to excessive vibration. 

 

Do not expose this device to excessively high temperatures. Do not place it in, on, 
or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in 
direct sunlight. 

 

Do not place or install this device in an area where it can be exposed to excessive 
amounts of dust, humidity, oil, smoke, or combustible vapors. 

 

This device contains a rechargeable battery. Dispose of this device only in 
accordance with local, state, or federal regulations for electronic waste. 

 

Charge the battery before first use and at least once every three months to keep it 
fresh and capable of holding the full charge. 

 

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or 
detergents. For stubborn deposits, moisten the cloth with warm water. 

 

This device has no user serviceable parts. Do not attempt to open, service, or 
modify this device.

 

 

Summary of Contents for 38071














Reviews: