6
DELETING BLUETOOTH PAIRINGS
Perform the following steps to delete any existing Bluetooth® pairings from memory.
1.
If the device is not already powered on, press and hold the POWER button for
about 2 seconds to turn the device on. The LED will flash blue twice.
2.
Wait at least 3 seconds, then press and hold the POWER button for about 2 seconds
to turn the device off. The LED will flash red twice.
3.
Wait at least 3 seconds, then slide the TX/RX switch to the opposite position.
4.
Press and hold the POWER button to turn the device on. The LED will flash blue
twice.
All Bluetooth pairings are now cleared.
CODEC PRIORITIES
This device supports five different audio codecs, ranging in quality from Qualcomm® aptX™
HD to the more common SBC. It will automatically select the highest quality codec that is
common to all connected devices. The codec priorities are shown below, from top to
bottom:
aptX HD
aptX Low Latency
aptX
AAC (receiver only)
SBC
