INFRARED
You can select to turn on/o
ff
the IR LED to response to
the requirements of di
ff
erent circumstances.
SMART
IR
The
Smart IR
func n is used to adjust the light to its
most suitable intensity, and to prevent the image from
over exposure. The
SMART IR
value can be adjusted
from 0 to 3. The higher the value is, the more obvious
e
ff
ects are, and it is disabled when the value is 0.
3.2.5
VIDEO SETTING
Move the cursor to
VIDEO SETTING
and press the
con
fi
rm bu on to enter the submenu.
CONTRAST
,
SHARPNESS
,
COLOR GAIN
,
DNR
and
MIRROR
are
adjustable.
VIDEO SETTING
CONTRAST
SHARPNESS
COLOR GAIN
DNR
MIRROR
RETURN
5
5
5
5
DEFAULT
Figure 3-5
Video Se ng
CONTRAST
This feature enhances the di
ff
erence in color and light
between parts of an image. You can set the
CONTRAST
value from 1 to 10.
SHARPNESS
Sharpness determines the amount of detail an imaging
system can reproduce. You can set the
SHARPNESS
value from 1 to 10.
COLOR GAIN
Adjust this feature to change the satura n of the color.
The value ranges from 1 to 10.
DNR (Digital Noise Reduction)
The DNR func on can decrease the noise e
ff
ect,
especially when capturing moving images in low light
condi ns and delivering more accurate and sharp
image quality.
You can set the
DNR
value from 1 to 10.
MIRROR
DEFAULT
,
H
,
V
, and
HV
are selectable for mirror.
DEFAULT
: The mirror func n is disabled.
H
: The image
fl
ips 180 degree horizontally.
V
: The image
fl
ips 180 degree ver cally.
HV
: The image
fl
ips 180 degrees both horizontally and
ver cally.
3.2.6
RESET
Reset all the se ngs to the default.
3.2.7
SAVE & EXIT
Move the cursor to SAVE &EXIT and press OK to save
the se ng and exit the menu.