1
Introduction
1.1
Product Features
This series of camera adopts high performance sensor
and advanced circuit board design technology. It
features high resolu
tio
n, low distor
ti
on, and low noise,
etc. It is suitable for surveillance system and image
process system.
The main features are as follows:
High performance CMOS sensor and high resolu
tio
n
bring high-quality image;
Low illumina
tio
n, 0.01 Lux @ (F1.2, AGC ON), 0 Lux
with IR;
IR cut
fi
lter with auto switch;
OSD menu, parameters are con
fi
gurable;
Auto white balance and internal synchroniza
tio
n;
SMART IR mode;
Advanced 3-axis design meets di
ff
erent installa
ti
on
requirements;
1.2
Overview
Moun
ti
ng Base
Video Cable
DC 12V Power Cord
P Posi
ti
on
Bracket
IR LED
Lens
Black Liner
Safety Rope
Bubble
Figure 1-1
Overview of Dome Camera
2
Installation
Before you start:
Please make sure that the device in the package is in
good condi
tio
n and all the assembly parts are
included.
Make sure that all the related equipment is power-o
ff
during the installa
ti
on.
Check the speci
fi
ca
tio
n of the products for the
installa
tio
n environment.
Check whether the power supply is matched with
your required output to avoid damage.
Please make sure the wall is strong enough to
withstand three
ti
mes the weight of the camera and
the moun
ti
ng.
If the wall is the cement wall, you need to insert
expansion screws before you install the camera. If the
wall is the wooden wall, you can use self-tapping
screw to secure the camera.
If the product does not func
tio
n properly, please
contact your dealer or the nearest service center. Do
not disassemble the camera for repair or
maintenance by yourself.
