8
INSTALLATION
Perform the following steps to install your matrix:
1.
Ensure that all equipment to be connected is powered off and unplugged from its
power source.
2.
Place or mount the matrix in its intended location. Use the included mounting
brackets or plastic feet, as desired.
3.
Using a High Speed HDMI® Cable (not included), plug one end into the HDMI input
on one of your displays, then plug the other end into one of the OUTPUTS on the
matrix. Repeat for the other three displays.
4.
(Optional) Using a digital coaxial S/PDIF cable (not included), plug one end into the
digital coaxial input on your external amplifier or receiver, then plug the other end
into the SPDIF output on the matrix. Repeat for the other three SPDIF connections,
as desired.
5.
Using a High Speed HDMI Cable (not included), plug one end into one of the INPUTS
on the matrix, then plug the other end into the HDMI output on one of your source
devices. Repeat for the other three source devices.
6.
(Optional) If the IR "eye" on the front panel will be obstructed, plug the included IR
receiver into the IR IN jack on the matrix, then position the IR "eye" where it can
receive signals from the included IR remote control.
7.
(Optional) If you will be controlling the matrix using a third party RS232 control
software (not included) on your PC, plug the included RS232 cable into the RS232
connector on the matrix, then plug the other end into a serial port on your
computer.
8.
(Optional) If you will be controlling the matrix using the built-in web GUI, plug one
end of an Ethernet cable (not included) into the TCPIP jack on the matrix, then plug
the other end into either an Ethernet router or switch in your existing network
(recommended) or directly into the Ethernet jack on your PC (not recommended).
9.
Plug the DC barrel connector on the included AC power adapter into the DC 24V
jack on the matrix, then plug the adapter into a nearby AC power adapter. The