22
Command
Function
Feedback Example
/+[Y]/[X]:******.
Sets the communication parameters
between the PC and one or more of the
HDBaseT™ receivers.
(Y=1~5 or A~H, where 1~4 sends the
command to the corresponding HDBaseT
receiver, 5 sends the command to all
HDBaseT receivers. For A~H, the
command is saved to the matrix/
transmitter and is not sent immediately
to the corresponding HDBaseT receiver.
For A~D, the saved command is sent to
the corresponding HDBaseT receiver
when a PWON command is sent and for
E~H, the saved command is sent when a
PWOFF command is sent.)
(X is the baud rate, where 1=2400,
2=4800, 3=9600, 4=19200, 5=38400,
6=57600, and 7=115200)
(****** is for the data, up to 48 bytes)
******
EDIDH[X]B[Y].
Sends the EDID data from the display
connected to output [X] to the source
device connected to input [Y]. If EDID
data is available and the audio portion
supports audio types other than PCM, it
forces it to set to PCM mode only. If EDID
data is not available, the EDID is set to
the default value.
(X/Y=1~4)
EDIDH[X]B[Y]