10
4.
(Optional) If you want to control the video source devices from the remote
locations, plug one of the included IR receivers into the IR IN jack on the receiver,
then position the IR receiver where it can receive infrared signals from the remote
control. Alternatively, if you want to control the remote displays from the
matrix/transmitter instead, plug one of the IR transmitters into the IR OUT jack on
the receiver, then position the IR emitter where it can transmit infrared signals to
the display's IR "eye". Repeat for the other two receivers.
Controlling the Source Devices from the Remote Locations
Controlling the Remote Displays from the Matrix/Transmitter Location