13
OPERATION
Front Panel Control
Repeatedly press the OUTPUT button to cycle through the various inputs for the
corresponding output.
Remote Control
Press the STANDBY (1) button to enter or exit Standby mode.
To switch the selected input for one or more of the outputs,
first press the number corresponding to the desired INPUT
(2), then press one or more OUTPUTS (3) or the ALL (4)
button, then press the ENTER (4) button to execute the
change.
Examples:
o
To send input 3 to output 2, first press the INPUTS 3
button, then press the OUTPUTS 2 button, and finally
press the ENTER button to execute the change.
o
To send input 1 to outputs 1 and 4, first press the
INPUTS 1 button, then press both the OUTPUTS 1 and 4
buttons, and finally press the ENTER button to
execute the change.
o
To send input 4 to all outputs, first press the INPUTS 4
button, then press the ALL button, and finally press
the ENTER button to execute the change.
To set the EDID for one or more source devices to the EDID capabilities of a specific
output, press the EDID (4) button, then press the desired INPUTS (2) or the ALL (4)
button, then press the OUTPUTS (3) button corresponding to the desired display,
finally press the ENTER (4) button to execute the operation.
