background image

11 

REGULATORY COMPLIANCE 

Notice for FCC 

 

This device complies with Part 15 of the FCC rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired 
operation.  
Modifying the equipment without Monoprice’s authorization may result in the equipment 
no longer complying with FCC requirements for Class B digital devices. In that event, your 
right to use the equipment may be limited by FCC regulations, and you may be required to 
correct any interference to radio or television communications at your own expense. 
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

 

 

Summary of Contents for 21792













Reviews: