5
PRODUCT OVERVIEW
Transmitter
1.
RS232 MODE Switch: Selects the RS232 mode. The CTRL position is the normal
operating mode where RS232 data is passed back and forth with the receiver. The
two UPDATE positions are for updating the transmitter's firmware using one of two
methods. See the
FIRMWARE UPDATE section for details.
2.
LINK LED Indicator: The LED illuminates green when there is a valid HDBaseT
connection with the receiver. The LED is off when there is no valid link.
3.
HDCP LED Indicator: The LED illuminates green when there is HDMI video traffic
with HDCP. It will blink green when there is HDMI® video traffic without HDCP and
will be off when there is no HDMI video traffic.
4.
POWER LED Indicator: The LED illuminates red when power is applied and is off
when no power is present.
5.
RS232 Connector: Connector for the included 3-pin to DB9 RS232 cable.
6.
IR IN Jack: 3.5mm jack for connecting the IR receiver.
7.
IR OUT Jack: 3.5mm jack for connecting the IR transmitter.
