9
USING A WALL OR DESK MOUNT
If you wish to use a wall or desk mount, you can do so with or without the included stand
installed. If you wish a cleaner appearance with the stand removed, perform the following
steps.
1.
Spread a towel or blanket out on the floor, table, or other flat surface. Place the
monitor face down on the towel or blanket.
2.
Using a #1 Phillips screwdriver, remove the four screws that hold the stand to the
monitor.
3.
Save the screws and stand for possible future use.
4.
Attach the monitor to a wall or desk mount with a 100x100 VESA pattern following
the instructions and using the hardware that came with the wall or desk mount.
INSTALLATION
Perform the following steps to install the monitor and prepare it for use.
1.
Install the stand or install the monitor to a wall or desk mount, as outlined in the
two sections above.
2.
Connect video cable(s) from your source device(s) to the monitor's input(s). The
monitor features four video inputs and the ability to display any two or all four
inputs on screen at the same time. A High Speed HDMI® Cable is included.
Additional High Speed HDMI Cables, DisplayPort cables, Dual-Link DVI-D cables, and
passive MHL™ cables are available separately.
