monolith HTP-1 Installation And User Manual Download Page 97

Page: 97 / 97

HTP-1 Installation and User Guide Release 1.8.1

Important Information

Information in this document is provided solely to aid users of the HTP-1 in understanding its operation. Monoprice

reserves the right to make changes without further notice to any products herein. Monoprice makes no warranty,

representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Monoprice

assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and

all liability, including without limitation consequential or incidental damages. Monoprice does not convey any

license under its patent rights nor the rights of others.

Monolith™ is a trademark of Monoprice Inc.

Dolby®, Dolby Atmos®, Dolby Surround®, Dolby ProLogic®, Dolby TrueHD™, Dolby Vision™, and the

double-D symbol are trademarks of Dolby Laboratories.

DTS®, DTS:X®, DTS Neural:X®, DTS Neo®, the Symbol, and DTS and the Symbol together are registered

trademarks of DTS, Inc. DTS-HD™ and DTS-HD Master Audio™ are trademarks of DTS, Inc.

Auro-3D®, Auro-Matic® and the Auro-3D logo are registered trademarks of Auro Technologies N.V..

Dirac® and Dirac Live® are registered trademarks of Dirac Research AB.

The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc.

Wi-Fi® and Wi-Fi Alliance® are registered trademarks of Wi-Fi Alliance.

HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

HDCP™ is a trademark of Digital Content Protection LLC.

Blu-ray Disc™, Blu-ray™, and the logos are trademarks of the Blu-ray Disc Association.

Roon® is a trademark of Roon, LLC registered in the U.S. and other countries.

Sony® is a registered trademark of Sony Corporation.

Microsoft®, Windows®, and Microsoft Edge® are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

Apple® and Mac® are trademarks of Apple Inc., registered in the U.S. and other countries.

Netflix® is a registered trademark of Netflix, Inc.

Vudu™ is a trademark of Vudu, Inc.

EDID® is a registered trademark of the Video Electronics Standards Association.

Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.

Google™, Chrome™, and Chrome OS™ are trademarks of Google LLC.

FIREFOX® is a registered trademark of Mozilla Foundation.

NEC® is a registered trademark of NEC Corporation.

HTP-1 User Manual

Page 97

V1.8.1

Summary of Contents for HTP-1

































































































Search results

Summary of Contents for HTP-1

Reviews:

Related manuals for HTP-1

Brands by name

Popular brands

monolith HTP-1, Installation And User Manual

Search results

Summary of Contents for HTP-1

Reviews:

Related manuals for HTP-1

Brands by name

Popular brands