22
49-80267 Rev. 4
Installation Instructions
UNDER-CABINET INSTALLATION
6
MOUNT THE HOOD
■ Carefully, lift the hood into the cabinet. Guide the
hood upwards to meet the ductwork.
IMPORTANT:
One person must hold the hood in
place while the other drives the screws into the
mounting frame.
7
COMPLETE THE INSTALLATION
AND CONNECT DUCTWORK
■ Drive 2 screws into each side bracket. Be sure
the screws engage the filler blocks or the cabinet
bottom.
■ Pull the glass canopy forward to access and install
2 screws through the hood and into the brackets on
both sides.
■ Use duct tape to secure the duct to the exhaust
outlet in the top of the hood. Do not use screws at
this location.
If there is a noticeable gap between the hood and the
bottom of the cabinet on the sides:
■ Slide canopy forward and install original top screws
through the bottom of the hood and into cabinet
bottom or frame.
NOTE:
Install wood filler blocks if necessary to accept
the screws.
Install a wood screw
on each side of the
mounting frame
Install 2 Screws into
Each Side Bracket
Install original top screws
1” = 2.5 cm; 1’ = 0.3 m