38-31-07
Monogram Sanitation
COMPONENT MAINTENANCE MANUAL
PN 15900-012 Series
Jan 10/95
(f)
Install connector (45) using screws (50), washers (55) and (60), nuts (65) and gasket
(67).
(g)
Install ground lug (25) to case (5) using screw (30), nylon washer (35) and nut (40).
(h)
Apply Loctite Sealant No. 404 to groove of seal (75) and install on case (5). No gap is
permissible at ends of seal.
(i)
Install case (5) using screws (10) and nylon washers (15). If removed during
disassembly, replace decal (135) and/or nameplate (140).
(j)
Safety wire screws (10) upon completion of assembly.
(3)
Storage Instructions
(a)
Place protective plastic caps over electrical connectors (EP10 and EP12) dust covers or
equivalent).
(b)
Place LLT together with a small envelope of desiccant in a polyethylene bag.
(c)
Seal bag vapor tight.
(d)
Label bag with LLT part number and date of overhaul.
NOTE:
LLT contains no cure dated items. Packaged LLT may be stored indefinitely.
Page 712
