Monogram 15900-012 Assembly Download

Page: 27 / 89

Monogram Sanitation

COMPONENT MAINTENANCE MANUAL

PN 15900-012 Series

38-31-07

Jan 10/95

(16) Remove clamps (340) by removing nuts (345 and 347)) and washer (350 and 352) and

removing spacers (354).

(17) Remove connector bracket (355) by removing nuts (360) and washers (365).

(18) Remove timer connector from bracket (355) by removing screws (370), washers (375)

and nuts (380).

(19) Remove timer assembly (385) and gasket (400) by removing screws (390) and washers

(395). Discard gasket.

(20) Remove timer bracket (405) by removing nuts (410) and washers (415).

(21) Remove ground strap (435) by removing nut (455), washers (445) and (450) and stud

(440).

(22) Remove liquid level transmitter (460) by removing screws (465) and washers (470) and

(475).

(23) Remove gasket (480), mounting plate (485) and O-ring (495) by removing screws

(490). Discard gasket and O-ring.

NOTE:

The details of the tank and top assembly (535), items (540) through (575), are set
in potting compound or epoxy and should not be disassembled.

(24) Remove and disassemble seat assembly (510) as follows:

(a) Remove hinge (520) by removing screws (515).

(b) Remove bumpers (525) from seat (530).

(25) Remove O-ring (500) from tank and top assembly (535).

Page 303

Summary of Contents for 15900-012


























































































Search results

Summary of Contents for 15900-012

Reviews:

Related manuals for 15900-012

Brands by name

Popular brands

Monogram 15900-012, Assembly

Search results

Summary of Contents for 15900-012

Reviews:

Related manuals for 15900-012

Brands by name

Popular brands