
HOW TO USE
Replace the print paper in the following situations
• When a red line appears at the edges of the print paper. The red line will appear when there is
only about one meter (3 feet) or so of print paper left on the roll.
• When the paper warning lamp lights red.
Note:
• Please use only the correct type of print paper.
• Particular attention must be given to the winding direction of the print paper, since copying
cannot be performed if the winding direction of the print paper is reversed.
• Be sure to keep the print paper straight when loading, failure to do so may cause wrinkling or
tearing of the paper during the copy function.
Standby Mode
If there is no key operation for about 120 min., a fluorescent lamp inside the copyboard automati
cally turns off and the unit goes into standby mode to save power consumption. (At this time, the
power indicator light stays on.) If at any time any key is pressed, the fluorescent lamp lights again,
and the normal operating condition is restored.
How to store Image Files on a Computer
The followings describe the procedure for downloading image files from the COPYBOARD to a
computer, displaying and printing it out.
1. Preparation for installing software
Put the supplied CD-ROM on the optical drive of the computer and install TWAIN driver and
PLUS Image Viewer.
* If any application which supports TWAIN is already installed into a computer, you need to install only the
TWAIN Driver.
2. Connect the copyboard and a computer using the USB cable, then turn the
power of the copyboard on.
3. Install the dedicated USB driver into your computer.
(It is required only at first time when you use the copyboard with the computer.)
4. Select “PLUS Copyboard BF-041” from “Choose TWAIN source” of “File” menu
5. Start “BF-041 Twain Driver” from “Acquire TWAIN source” of “File” menu
6. Push PC key of the control panel or click PC button of the software, then the
image on the sheet is scanned and transferred to the computer and saved as
image data.
* For a detailed explanation, see Page E-14.
E-9
http://www.monomachines.com/
http://www.monomachines.com/