SPECIFICATIONS
Item
Specification (BF-041S)
Specification (BF-041W)
Board surface size
W1300
×
H920 mm
(51.2
×
36.2 inches)
W1800
×
H920 mm
(70.9
×
36.2 inches)
Effective reading area
W1240
×
H880 mm
(48.8
×
34.6 inches)
W1740
×
H880 mm
(68.5
×
34.6 inches)
Number of pages
2 pages
2 pages
Sheet driving method
One direction endless drive
One direction endless drive
Grid
50 mm (2 inches) squares
50 mm (2 inches) squares
Writing instruments
Dry Erase Whiteboard markers
(black/red/blue)
Dry Erase Whiteboard markers
(black/red/blue)
Reading method
CCD sensor
CCD sensor
Print method
Thermal printing
Thermal printing
Print density
8 dot/mm
8 dot/mm
Print paper
Special thermal sensitive paper
(30 m / 98 ft roll)
Special thermal sensitive paper
(30 m / 98 ft roll)
Size of print paper
A4 size (210
×
297 mm),
Letter size (8.5
×
11 inches)
A4 size (210
×
297 mm),
Letter size (8.5
×
11 inches)
Print color
Black
Black
Scan speed
1-page copy:
11 sec/copy
Two-in-one page copy:
22 sec/copy
1-page copy:
15 sec/copy
Operating conditions
Temperature: 10–35°C
Humidity: 30–85%
(No condensation)
Temperature: 10–35°C
Humidity: 30–85%
(No condensation)
Power source
100–120 V, 220–240 V
The condition is subject to change
depends on sales area
100–120 V, 220–240 V
The condition is subject to change
depends on sales area
Power consumption
60W at stand-by, 120 W at operation 60W at stand-by, 120 W at operation
Outer dimensions
W1470
×
D600
×
H1885 mm
(W57.9
×
D23.6
×
H74.2 inches)
W1970
×
D600
×
H1885 mm
(W77.6
×
D23.6
×
H74.2 inches)
Weight
37 kg / 81.5 lb
43 kg / 94.7 lb
Others Consumables
Thermal print paper
(30 m / 98 ft)
Markers
Eraser
Thermal print paper
(30 m / 98 ft)
Markers
Eraser
* Specifications are subject to change without notice for improvement.
Auto Power Off
If no button is pressed after the power is turned on, the fluorescent lamp automatically turns off after 120
minutes (= the setting at factory shipment) though the Power Lamp is stay lit. It is standby mode to save
power consumption. When any COPY related button is pressed, the fluorescent lamp turns on again
and the copyboard comes back to normal mode.
Placing this unit next to equipment or buildings (such as broadcasting stations) where strong RF interference
is generated may sometimes cause printing to become blurred or disordered when copies are made. This
does not indicate a breakdown or problem in this unit.
E-19
http://www.monomachines.com/
http://www.monomachines.com/