HOW TO USE
BEFORE USE . . .
Please fix supplied stabilizers at each end of the dedi
cated stand when you mount the BF-041 on it for stable
and safe usage.
Please lock the caster stoppers by pressing the lower
portion of the lock button.
Plug in and turn ON the power switch. Power lamp brinks
for a couple of seconds , then stays lit.
The fluorescent lamp inside the copyboard turns on, and
then the copyboard becomes ready for operation.
Notice:
There is a case that the warm-up time becomes a little
longer for good and stable printing quality.
WHEN COPYING . . .
POWER
POWER ON
PAPER OUT
When copying one page:
Press the one-page copy key. At this time the sheet scrolls
by one page and the written contents are copied onto A4/
Letter paper.
When copying reduced two-page in one copy
(BF-041S only):
Press two-in-one page copy key. At this time the sheet
scrolls by two pages, and the written contents are reduced
to A4/Letter size and copied.
When copying onto A4-L paper (BF-041W only):
Press A4-L copy key. At this time the sheet scrolls by one
page, and the written contents are reduced to A4-L size
(210
×
400 mm / 8.5
×
15.7 inches) and copied.
Tear-off print paper
When copying is completed, pull the tip of the print paper
upwards and tear it off with the edge of the outlet.
Press the feed/stop key to cancel the copy operation im
mediately. The printer stops after completion of copying
up to that point.
E-7
http://www.monomachines.com/
http://www.monomachines.com/