EN
Mounting instructions MonLines mySwing MSM05 - Version no. 2021-10
8
Step 6
Attach the infrared receiver directly to the bottom right of the front of the TV or to the wall near the TV using the double-
sided adhesive tape. Make sure that the infrared receiver is not blocked by the TV or other objects.
Attention: The signal strength of the remote control depends on the position of the infrared receiver. Place it in an accessible
location where it can receive the signal well.
Attach the 2 foam pads to the back of the TV for protection and stabilization. Route the infrared receiver cable and the power
cable along points 1 - 5 as shown in the drawing and secure both cables using the cable ties and covers provided. Place the
covers on the top and bottom of the holder respectively.
Attention: When attaching the cable ties, leave enough slack to allow the swivel arm to move to the left and right at the
maximum angle. The cable length should not affect the freedom of movement of the TV wall mount.
