Money Controls TSP157, Technical Manual

Page: 19 / 45

Bulk Coin Recycler Technical Manual TSP157.doc Issue 1.3
– Jan 11

Money Controls 2008. All rights reserved.
Page 19 of 45
2.19.2 PRODUCT COMPLIANCE
2.19.2.1 Emissions
This product is compliant with EMC test specification EN50081-1; 1992
2.19.2.2 Immunity
This product is compliant with EMC test specification EN50082-1; 1997
2.19.2.3 Safety
This product is compliant with EN60950; 1992 + Amdt A1 & A2: 1993 & A3: 1995 Safety
2.19.3 ENVIRONMENTAL:
Table 4: Environmental Ranges
Operating Temperature 0 to 60
0
C
Storage Temperature -20 to 70
0
C
Operating Humidity 10 to 75% RH
Storage Humidity 10 to 95% RH non condensing
2.20 Maintenance Schedule
Table 5: Maintenance Schedule
Maintenance Schedule
Every 50,000 to 100,000
depending on coin type. Using a mild detergent on a damp cloth.
No spray solvents should be used.
Every 500,000 coins. Replace ejector fingers and spring
Every 1,000,000 coins. Replace adjuster plate
Expected product lifetime: 3 million coins with routine maintenance
2.20.1 CLEARING A COIN JAM:

Remove all coins from bowl.

Remove motor assembly from base as described.

Clear the jammed coin by either:
i. Rotating the disk manually, first anti-clockwise then clockwise to free the coin
OR
ii. Push the coin back in using another coin.

Remove any debris from the disk bed assembly.

Clean the exit window opto with a clean dry cloth.

Re-assemble, as described.

Refill and test the hopper.