Monessen Hearth BWB400 Series, Installation, Operation And Maintenance Manual

Page: 68 / 80

28
G
LASS
D
OOR
I
NSTALLATION AND
F
AN
A
CCESSORY
F
AN
A
SSEMBLY
The model BWBC500 and BWBC500I Fireplaces may be equipped with a accessory fan Model FA2. If the
fireplace is to be equipped with this accessory at anytime, the JB1 junction box assembly must be installed on
the fireplace as shown by Figures 32 and 33 during the installation of the fireplace. Unless the JB1 junction
box is installed at this time, wall finishing materials must be removed to gain access to the side of the fireplace
to install the JB1 junction box at a later date. Complete Installation and Operation Instructions for the FA2 Fan
are included in the package with this accessory.
Note: A rectangular switch knockout is provided on the lower right hand face of the fireplace.
G
LASS
D
OOR
I
NSTALLATION
This fireplace has been tested and listed for use with optional Model GD42P or GD42PB glass doors. For
installation of the Models GD42P or GD42PB glass doors, see the instructions provided with the doors.
NOTE: THE THREE PRONG RECEPTACLE NOTE: THE THREE PRONG RECEPTACLE
AND ITS COVER MUST BE EXPOSED AND
AND ITS COVER MUST BE EXPOSED AND
THE COVER PLATE MUST BE REMOVABLE
THE COVER PLATE MUST BE REMOVABLE
FOR INSPECTION OF WIRING CONNECTION
FOR INSPECTION OF WIRING CONNECTION
ONCE THE FIREPLACE IS INSTALLED.
ONCE THE FIREPLACE IS INSTALLED.
FASTEN MODEL JBI JUNCTION FASTEN MODEL JBI JUNCTION
BOX TO THE SIDE OF THE
BOX TO THE SIDE OF THE
FIREPLACE WITH THE TWO
FIREPLACE WITH THE TWO
SHEET METAL SCREWS REMOVED
SHEET METAL SCREWS REMOVED
FROM JUNCTION BOX
FROM JUNCTION BOX
OPENING COVER.
OPENING COVER.
JUNCTION BOX JUNCTION BOX
OF FIREPLACE
OF FIREPLACE
TO FUSE OR TO FUSE OR
CIRCIUT BREAKER
CIRCIUT BREAKER
GROUND GROUND
WHITE WHITE
BLACK BLACK
NOTE: THE JB1 JUNCTION BOX SHOULD BE INSTALLED AND THE RECEPTACLE WIRED TO THE E NOTE: THE JB1 JUNCTION BOX SHOULD BE INSTALLED AND THE RECEPTACLE WIRED TO THE ELECTRICAL SYSTEM OF LECTRICAL SYSTEM OF
THE STRUCTURE AT THE TIME OF INSTALLATION OF THE FIREPLACE OF THE FA THE STRUCTURE AT THE TIME OF INSTALLATION OF THE FIREPLACE OF THE FA2 FAN ASSEMBLY IS TO BE USED. 2 FAN ASSEMBLY IS TO BE USED.
SWITCH SWITCH
(SPST)
(SPST)
CORDSET CORDSET
120V, 60HZ
120V, 60HZ
(FAN ASSEMBLIES) (FAN ASSEMBLIES)
M2 M2 M1
GAS APPLIANCE GAS APPLIANCE
OPENING COVER
OPENING COVER
JUNCTION BOX JUNCTION BOX
OPENING COVER
OPENING COVER
MODEL JBI JUNCTION BOX INSTALLATION MODEL JBI JUNCTION BOX INSTALLATION
REMOVE JUNCTION BOX REMOVE JUNCTION BOX
COVER FROM FIREPLACE.
COVER FROM FIREPLACE.
BELK LOUVER KIT BELK LOUVER KIT
F
IGURE
32
F
IGURE
33
53D9032. Rev 1 03/03