Monessen Hearth BWB400 Series, Installation, Operation And Maintenance Manual

Page: 5 / 80

NOTE: COMBUSTIBLE MATERIALS SHOULD NOT BE INSTALLED BELOW TOP SPACER. NON-COMBU NOTE: COMBUSTIBLE MATERIALS SHOULD NOT BE INSTALLED BELOW TOP SPACER. NON-COMBUSTIBLE MATERIALS STIBLE MATERIALS
SUCH AS BRICK OR TILE MAY BE USED TO TRIM FACE OF THE FIREPLACE BUT SHOULD NOT C SUCH AS BRICK OR TILE MAY BE USED TO TRIM FACE OF THE FIREPLACE BUT SHOULD NOT COVER ANY PORTION OF THE OVER ANY PORTION OF THE
LOUVERED PANEL OR COOL AIR INLET. COMBUSTIBLES MUST NOT OVERLAP THE BLACK PAINT LOUVERED PANEL OR COOL AIR INLET. COMBUSTIBLES MUST NOT OVERLAP THE BLACK PAINTED FACE OF FIREPLACE. ED FACE OF FIREPLACE.
CAUTION: DO NOT BLOCK AIR INLETS OR OUTLETS. CAUTION: DO NOT BLOCK AIR INLETS OR OUTLETS.
FIREPLACE - MODEL SCF36A SHOWN FIREPLACE - MODEL SCF36A SHOWN
RESIDENTIAL INSTALLATION RESIDENTIAL INSTALLATION
TO COMBUSTIBLES MODEL: TO COMBUSTIBLES MODEL:
CHIMNEY (2" MIN. AIR SPACE CHIMNEY (2" MIN. AIR SPACE
38 1/2" 38 1/2"
FRAMING FRAMING
DIMENSION DIMENSION
FRAMING DIMENSIONS FRAMING DIMENSIONS
FRONT - TO BACK FRONT - TO BACK
21 1/2" 21 1/2"
COMBUSTION AIR COMBUSTION AIR
ASSEMBLY MODEL AK4 ASSEMBLY MODEL AK4
FLEXIBLE DUCT FLEXIBLE DUCT
TYPE FP-4-U TYPE FP-4-U
NAIL TO FRAMING MEMBERS NAIL TO FRAMING MEMBERS
COOL AIR INLET (SEE CAUTION) COOL AIR INLET (SEE CAUTION)
GD36B/GD36PB GLASS GD36B/GD36PB GLASS
DOOR ACCESSORY
DOOR ACCESSORY
WARM AIR OUTLET WARM AIR OUTLET
(SEE CAUTION)
(SEE CAUTION)
GALVANIZED METAL STRIP GALVANIZED METAL STRIP
TOP SPACER TOP SPACER
S12 (1 FT. PIPE) S12 (1 FT. PIPE)
S18 (18 IN. PIPE) S18 (18 IN. PIPE)
S36 (3 FT. PIPE) S36 (3 FT. PIPE)
S48 (4 FT. PIPE)
S48 (4 FT. PIPE)
SEE NOTE SEE NOTE
FIRESTOP-MODEL SF FIRESTOP-MODEL SF
(REQUIRES 14 1/2 X 14 1/2 OPENING) (REQUIRES 14 1/2 X 14 1/2 OPENING)
1 3/4" MIN. AIR SPACE TO COMBUSTIBLES) 1 3/4" MIN. AIR SPACE TO COMBUSTIBLES)
STORM STORM
COLLAR
COLLAR
ROOF FLASHING ROOF FLASHING
MODEL 612 MODEL 612
ROUND CHIMNEY CAP ROUND CHIMNEY CAP
MODEL SC MODEL SC
(BOTTOM OF FIREPLACE) (BOTTOM OF FIREPLACE)
(FLUE OUTLET HEIGHT) (FLUE OUTLET HEIGHT)
37 3/4" 37 3/4"
FRAMING FRAMING
DIMENSION DIMENSION
14 FT. = MIN. HEIGHT (NO OFFSETS) 14 FT. = MIN. HEIGHT (NO OFFSETS)
14 FT. = MIN. HEIGHT (2-30
14 FT. = MIN. HEIGHT (2-30˚ ELBOWS) ELBOWS)
21 FT. = MIN. HEIGHT (4-30 21 FT. = MIN. HEIGHT (4-30˚ ELBOWS) ELBOWS)
86 FT. = MAX. HEIGHT (CHIMNEY 86 FT. = MAX. HEIGHT (CHIMNEY
SUPPORT EVERY 30 FT.)
SUPPORT EVERY 30 FT.)
6
5
C
LEARANCES
F
IGURE
1
O
PERATION
G
UIDELINES
supplied, this can cause a negative pressure in the home. When this happens, the house will draw in outside
air from the cracks in the windows, down the fireplace flue or other locations of air leakage in the home.
Because cold air infiltration may be unavoidable in some structures, Monessen Hearth Systems is not responsible
for heat loss or air infiltration through or around the fireplace.
53D9031. Rev 1 03/03