5
Register the terminal
to a base
Register the terminal to the iWL220 communications base through
which it will communicate with the Moneris Host.
Note:
You may register the terminal to the base that you received
with the terminal, or you may register the terminal to a different
iWL220 base if that base is functioning as a communications base.
•
If using IP communications: max. five (5) terminals registered
to one (1) base.
•
If your terminal will be connected to a restaurant POS system:
max. five (5) terminals registered to one (1) base.
•
Every terminal must be registered individually.
•
A terminal can only be registered to one communications base at
a time. (To use a different base, register the terminal to that base.)
1.
Record the eight-digit Base ID: Look on bottom of the
communications base to which the terminal is to be registered.
The Base ID (8-digit number) is printed on a sticker and appears
as “
ID: 12345678
”.
2.
Place the terminal on the communications base. (Do not
remove the terminal until it has been successfully registered
to the base.)
3.
Press the
key twice, key in
17
and press the
key.
4.
Press the
key to select REGISTER BASE.
5.
Key in the
Base ID
you recorded in step 1, and press the
key.
6.
Press the
key three times to display the TERMINAL SETUP
REQUIRED screen.
Note:
When the icon displays on the screen (in 10-15 seconds), it
means that the terminal has successfully established a link to the
communications base.
7.
Proceed to
Communications setup
in this guide on page 6.
All manuals and user guides at all-guides.com
all-guides.com
