42
AS 914 TI
User Manual
PROBLEM
LIkELY CAUsEs
REMEDIEs
Table top will not turn in
one direction.
❏
Reverser switch broken
❏
Change reverser switch.
Table top will not turn in
either direction.
❏
Reverser switch broken.
❏
Belt broken.
❏
Gear motor jammed.
❏
Fuse blown.
❏
Change reverser switch.
❏
Change belt.
❏
Change gear motor.
❏
Change fuse.
Table top makes a third of
a turn and then stops.
❏
Gear motor seizing.
❏
Change gear motor.
Table top does not clamp
rim.
❏
Table top cylinder de-
fective.
❏
Clamping slide grippers
worn.
❏
Change table top cylinder.
❏
Change sliding clamp.
Table top demounts or
mounts tires with difficulty.
❏
Insufficient belt tension.
❏
Adjust belt tension or
change it.
Vertical slide lifts off too
much or too little from
the rim.
❏
Clamping plate not ad-
justed.
❏
Adjust plate.
Rim rest is blocked all the
way out or all the way in.
❏
Foreign body jamming
mechanism.
❏
Remove foreign bodies.
Inflation gauge needle
does not go back to “0”.
❏
Defective gauge.
❏
Gauge damaged by
impacts
❏
Change gauge.
Avoid personal injery or death.
The “spare parts” handbook does not authorise the user to carry out any work on
the machine other than the operations specifically described in the User Manual,
and is only intended to enable the user to provide the technical assistance service
with precise information in order to minimise response times.
WARNING
