STEP 4.
Line up the grooves on the piece on Leg A with the grooves on the inside of the motor rod. Push the pieces together and screw the cover onto the motor rod.
STEP 5.
Take the motor rod (6) and line up the hexagonal rod with the cog on the inside of Leg B.
*Note: If the pieces don’t align, twist the motor rod anti clockwise until they align.
STEP 6.
Align the grooves on the piece on Leg B with the grooves on the inside
of the motor rod. Push the pieces together and screw the cover onto the
motor rod.
Using the Screwdriver (10), tighten the M4 Screw (15) in the hole on the
hexagonal rod.
Assembly Instructions
SIT STAND DESK
(6)
(6)
(6)
(6)
(15)
MONDO LYPTA SIT STAND DESK
