STEP 7.
STEP 8.
Lay the two halves of the desk top (7) on a flat surface with the holes on the side facing towards each other and the pre-drilled holes on the surface. Push the
10 wooden dowels (8) into the holes in the desk top, align the dowels and the holes and push the two halves of the desk top together. Ensure the pieces are
flush.
Attach the control panel (11) to the motor (on Leg A), power supply (12) and power cord (13).
TESTING THE FRAME
Plug the power cord into a power source and press above the button for 3 seconds, until it beeps.
Hold down the
button and ensure the base lifts to the top. 116 should be displayed on the control panel.
Hold the button and check the frame lowers to the bottom. 72 should be displayed on the control panel.
Turn off the power source and unplug everything from the motor.
Motor
(13)
(12)
(11)
Assembly Instructions
SIT STAND DESK
(7)
(8)
MONDO LYPTA SIT STAND DESK
