Assembly Instructions
SIT STAND DESK
STEP 1.
STEP 3.
Lay Leg A (1) and Leg B (2) down with the inside of the legs facing each
other.
STEP 2.
Lay one of the frames (3) on top of the Legs and line up the holes. Using
the Allen Key (9), loosely fasten the pieces together with 4 M6 Screws (14).
*Note: Do not tighten screws until the frame is upright
Holding both legs, carefully flip the base onto the other side and repeat with
the other frame (3).
Carefully flip the base so the legs are in the air.
Align the holes in the feet (4) with the holes on the bottom of the legs and use the Allen Key to fasten 4 M6 Screws (14) on each foot.
Carefully flip the base onto its feet and tighten the screws on the frame.
Line up holes on the side bracket (5) on the outside of the base with the arrow facing outward. Attach the pieces using 8 M6 Screws (14) and the Allen Key.
(1)
(2)
(3)
(14)
(4)
(14)
(14)
(14)
(5)
MONDO LYPTA SIT STAND DESK