Monarch 9474, Programmer'S Manual

Page: 34 / 96

One digit to control how tickets are cut.
Values: 0 = no cut
1 = cut each ticket in the batch (except last ticket)
2 = cut each ticket in the batch (including
last ticket in batch)
3 = cut between batches
NOTE: Do not use option 2 if your supply is less than 4
inches long (1016 tomms) or more than 8 inches long
(2032 tomms)
When using option 2, the first 0.7 inches of the supply cannot
be used for printing.
On non-knife printers:
On a 9474 with no knife, this parameter controls the backing
paper takeup, instead of the knife.
Values: 0 = print tags with no backing paper.
1 = print labels and take up the backing paper.
REP One to four digits for the supply repetition for cutting, and
increment/decrement field.
Values: 1-9999
PARTS One digit for the number of parts across the supply.
Values: 1-5
RESERVED Enter 0 .
MODE One character to define the mode of printing, or batch
separator.
Values: 0 = separator off.
1 = double length separator (use for 924 or 925
stacker). 3 mm extra length tag on 920 stacker.
2 = normal length separator with 3 mm black stripe.
3 = 3 mm extra length tag with 6 mm stripe.
NOTE: If using value 0,1, 2, or 3, do not use a separate
batch separator packet.
3-20 Message Structures