Monarch 9474, Programmer'S Manual

Page: 26 / 96

B a r C o d e F i e l d R e c o r d
The bar code field record is constructed as shown below.
Syntax
B##,IFLAG,IVALUE,ROW,COL,DENSITY,BFONT,
F-ROT,HEIGHT,HR
p
Field Contents
BARCODE Must be the letter ‘B’ for a bar code field.
The B is followed by one or two digits for the field number.
There can be up to 100 fields per format, in any combination
of text, barcode, line, or graphic fields.
Values: 0-99
IFL AG You can set numeric fields to increase or decrease in value as
each ticket is printed.
This parameter consists of one character to define the field as
incremented, decremented, or constant.
Values: I = Increment
D = Decrement
If the field does not change, define IFLAG as ‘I’ and set
IVALUE to zero (0).
NOTE: Do not select incrementing on UPC or EAN bar codes
or fields that contain a check digit.
IVALUE One to three digits to define the amount by which the value in
the field increases or decreases as each ticket is printed. If
the field does not change, define IFL AG as ‘I’ and set IVALUE
to zero (0).
NOTE: The first number in the count sequence must contain
the same number of digits as the highest number to
be counted. For example, to count the numbers 1 to
999, the first number in the sequence must be entered
as 001.
Values: 0-999
ROW One to four digits to define the row location of the field on the
supply. This is the distance from the guide edge zero point at
the
bottom of the supply and the bottom of the field.
3-12 Message Structures