11
To enter one of the External Delay Modes:
1.
Plug an external input into the unit.
2.
Press the
PHASE DELAY
button to cycle to the desired mode.
3.
Use knob to adjust delay/angle (phase, time or virtual RPM).
To exit the External Delay Mode:
1.
Press the
PHASE DELAY
button to cycle back to External only.
2.
The word
PHASE
or the TIME or AUTO icon will go away.
4.6 Power Up Features
When the strobe is powered up, it will remember the last settings.
Press and hold the
x2/MENU
button, then turn on the strobe by
depressing the trigger switch. This will turn on all the display segments
for two seconds or until you release the button. It will then show the
software revision, “REV x.x” and then go through a display diagnostic.
Press and hold the
÷2
button, then turn on the strobe by depressing
the trigger switch. This will restore the factory programmed presets.
