2) To replace the battery, remove the old battery, connect the battery con-
tacts to the new battery and insert it into the compartment.
Replace a defective fuse by one of the same type only.
range up to 200 mA
F 200 mAL / 250 V
range up to 10 A
F 10 AL / 250 V
3) Fasten the screws of the cover again before setting the meter into op-
eration.
7 Specifications
Display: . . . . . . . . . . . . . . 3
1
/
2
digits, 21 mm LCD
Measuring rate: . . . . . . . . 2 measurements per second
Measuring category: . . . . CAT III 250 V
Voltage measurement: . . . 250 V
¿
/~ max.,
200 mV range: overload protection 200 V
¿
/~
Fuses
up to 200 mA: . . . . . . . F 200 mAL/250 V
200 mA to 10 A: . . . . . . F 10 AL/250 V
Resistance measurement/
continuity test . . . . . . . . . . Overload protection 250 V
¿
/~ for 15 s max.
Input resistance: . . . . . . . > 1 MΩ
Frequency range V
AC
: . . . 45 – 450 Hz
Diode test: . . . . . . . . . . . . display of the forward voltage up to 1.999 V,
measurement current 1 mA max.,
max. measurement voltage 2,8 V approx.
Continuity buzzer: . . . . . . response threshold < 20 Ω approx.
Battery test: . . . . . . . . . . . test current 6 mA (9 V battery)
or 100 mA (1.5 V battery)
Operating conditions: . . . . 0 – 50 °C, relative humidity < 70 %
Power supply: . . . . . . . . . 9 V battery (not supplied)
Dimensions, weight: . . . . 68 × 138 × 37 mm, 200 g
Used batteries must not be placed in the household waste,
always take them to a special waste disposal, e. g. collection
container at your retailer.
18
GB
Summary of Contents for DMT-2004
Page 2: ...1 2 3 4 5 6 7 2...
