VOYA E+ FENDER SET
Specifications
Material: plastic/aluminum
Color: Matt black
Diameter: F: 685mm / R: 1208mm
Weight: F: 173g / R: 332g
Package Contents
1 x front fender
1 x rear fender
1 x U stay for front fender
2 x V stays for rear fender
Front Fender hardware:
(F-b) 2 x M5*10 bolts
(F-c) 1 x M5 clip set
(F-a) 3 x M5*12 bolts
- Only use the fender set and supplied installation hardware.
- Do not modify the fender set in any way.
- Periodically check all bolts are tight as vibrations may loosen them over time.
- Do not use the fender set to move or lift the bike.
- If you are not confident with compatibility and installation of this product, please
consult your local authorized dealer.
- Regulation can vary by country, and/or location, always check in advance.
Installation
1. Ensure the bike is switched off with kickstand engaged and is on level ground.
2. Remove any accessories that may interfere with the installation and/or use of
the fender set.
Rear fender:
5. Put four M6 eye bolts passing through the holes of fixed hangers from inside of
the rear fender, and tighten with M6 nuts from outside. Don't tighten completely
at this time.
6. Pass through two V stays to four M6 eye bolts and the holes of fixed hanger,
please use the shorter leg as the front. Assemble four black rubber covers with
the end of V stays.
7. Install rear fender with bike:
Front end of seat stay: use a 4mm hex torque wrench to tighten one M5*12 bolt.
Front end of chain stay: Use a 4mm hex torque wrench to tighten one M5*12
bolt.
Rear end of seat stay: use a 4mm hex torque wrench to tighten two M5*12
bolts.
Adjust the rear fender to appropriate height and tighten the bolts with 5-8Nm.
8. If you assemble Momentum rack together, please purchase additional Dual
Mounting Kit.
9. Double check if the fender set is properly installed. The fender set should not
move or rotate in any direction.
Usage information
- Check if the fender set is firmly mounted before every ride.
- Regulary check the state of the fender set and mounting parts for any signs of
looseness, deterioration, corrosion or other damage.
LIMITED PRODUCT WARRANTY INFORMATION
Giant Global Inc. warrants its products for a period of one (1) year from the date of
purchase, this applies only for the original owner. This warranty applies only to this
product when purchased new from an Authorized Giant Dealer and assembled by
that dealer at the time of purchase.
LIMITED REMEDY
Unless otherwise provided, the sole remedy under the above warranty, or any
implied warranty, is limited to the replacement of defective parts with those of
equal or greater value at the sole discretion of Giant Global Inc. This warranty
extends from the date of purchase, applies only to the original owner, and is not
transferable. In no event shall Giant Global Inc. be responsible for any direct,
incidental or consequential damages, including, without limitation, damages for
personal injury, property damage, or economic losses, whether based on contract,
warranty, negligence, product liability, or any other theory.
EXCLUSIONS
The above warranty, or any implied warranty, does not cover:
• Normal wear and tear on parts in situations where there are no assembly or
material defects.
• Products serviced by other than an Authorized Giant dealer.
• Modifications of the product from its original condition.
• Use of this product for abnormal, competition and/or commercial activities or for
purposes other than those for which this product was designed.
• Damage caused by failing to follow the User's Manual.
• Paint, finish and decal damage resulting from taking part in competitions,
jumping, downhill and/or training for such activities or events or as a result of
exposing the product to, or operating the product in, severe conditions or
climates.
• Labor charges for part replacement or changeover.
Except as is provided by this warranty and subject to all additional warranties,
Giant Global Inc. and its employees and agents shall not be liable for any loss or
damage whatsoever (including incidental and consequential loss or damage
caused by negligence or default) arising from or concerning any Giant Global Inc.
product.
Giant Global Inc. makes no other warranties, express or implied. All implied
warranties, including the warranties of merchantability and fitness for a particular
purpose are limited in duration to that of the express warranties stated above.
Any claim against this warranty must be made through an Authorized Giant Dealer
or distributor. The purchase receipt or other proof of the date of purchase is
required before a warranty claim may be processed. Claims made outside the
country of purchase may be subject to fees and additional restrictions. Warranty
duration and details may differ by country. This warranty gives you specific legal
rights, and you may also have other rights which may vary from place to place.
THIS WARRANTY DOES NOT AFFECT YOUR STATUTORY RIGHTS.
Disclaimer
To ensure safety, quality and reliability, use only original parts or Giant authorized
replacements for repair and replacement. Giant is not responsible for any direct,
incidental or consequential damages, including, without limitation, damages for
personal injury, property damage, or economic losses due to improper use.
Warning
- Read all information in this manual carefully before you start using the fender set.
Safety instructions are very important and should not be overlooked. By reading
the manual you will have a better understanding of the general operation.
Front fender:
3. Assemble front fender and U stay first with two M5*10 bolts and one M5 clip set
with Phillips screwdriver.
(Note: do not fix the bolts at the same time. Please tighten the upper bolt first, then
fix the lower bolt. When completed, the clip set fully covered U stay)
4. Install front fender with bike:
Top of the front fork: Use a 4mm hex torque wrench to tighten one M5*12 bolt in
the back side of front fork.
Both sides of front fork: Use a 4mm hex torque wrench to tighten two M5*12
bolts.
Adjust the front fender to appropriate height and tighten the bolts with 5-8Nm.
