SpectraMax Mini User Guide
18
5090339 A
3. Use the hex key (included in the accessory case) to loosen screw #1 in the upper-right
corner of the transport lock until the lock disconnects from the instrument frame. The screw
has a retaining washer to prevent removal from the lock.
Tip: After you loosen screw #1, pull the plate drawer slightly out of the instrument to
hold the chamber door open.
4. Loosen screws #2 and #3 until the lock comes free of the plate drawer and you can remove
the lock from the instrument. The screws have retaining washers that prevent removal from
the lock.
Note: Store the transport lock in slot within the accessory case.
5. Push the plate drawer back inside the instrument and close the chamber door.
Connecting Instrument Cables
The power cord and USB cable connect to the ports on the rear of the instrument.
Note: Before you connect or disconnect the power cord, make sure that the power
switch that is on the rear of the instrument is in the Off position.
To connect the instrument cables:
1. Turn the instrument around so that the rear of the instrument faces you.
2. Make sure that the power switch is in the Off position.
3. Connect the appropriate end of the supplied USB cable to the USB port, and then connect
the other end to a USB port on the computer.
4. Connect the supplied power adapter to the power cord port, and then connect the other
end to a grounded electrical wall outlet.
5. Turn the instrument around so that the front of the instrument faces you.
Note: Ensure no cables run beneath the instrument.
