E-4
SkanWasher 400 User Guide
SkanWasher 400 Wash Program Sheet
Program 4
Wash programs are pre-set at the factory. These programs may be edited.
Instrument Parameters
Wash Sequence
Program Number
4
Program Name
C : A + D
Date
15.04.1998
Signature
HT
Description Demo program, to be used with Coomb’s wash. High inlet liquid
pressure / flow to resuspend cell pellet. Aspirate followed by a dispense.
Aspirate probe needs to be adjusted to microplate to be used.
Air Pressure
0.40 [bar] Volume Adjust
σ
V
[-]
Aspirate Probe
0.0 [mm] Dispense Probe
2.0 [mm]
1.
Wash Step
Aspirate Wash Dispense Soak Rinse 2.0 sec/____ µl
2.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/ 200 µl
3.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
4.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
5.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
6.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
7.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
8.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
9.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
10. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
11. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
12. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
13. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
14. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
15. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
16. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
