Molecular Devices SkanWasher 300, User Manual

Page: 26 / 78

Software Configuration
17 SkanWasher 300 User Guide
Figure 9: Aspirate probe height position
Figure 10: Dispense probe height position
Set Dispense
Position The position of the dispense probe is adjusted using this
setting.
‹
Place microplate in lift and press
[Enter]
to
raise microplate to probes. Use
¿À
arrow keys
to set at correct height (see Figure 10).
‹
Total adjustable distance is 6 mm.
Wash Program
1-16 Up to 16 wash steps can be added. There are seven wash
step selections available for each step: Rinse time, Disp
volume, Soak / Pause, Wash volume, Wash time, Aspi-
rate, and End Wash. See Table 1 on page 18 for descrip-
tions.
Program
Configuration
Description
h = 0-6 mm
200 L 0 L
h = 0-6 mm