Molecular Devices GenePix 4300A, User Manual

Page: 26 / 36

Maintenance & Troubleshooting
26 0112-0173 B
Moving the Scanner
If the GenePix 4300A/4400A Microarray Scanner must be moved within
the lab, or returned to Molecular Devices for service, the scanner must
be prepared for transport.
If you do not have the original shipping crate, contact Molecular
Devices and a new crate can be provided for an additional charge.
To move the scanner
CAUTION! Always use the Park Scanner utility prior to moving the
scanner. Failure to park the scanner can result in misalignment or
damage of the optical system.
1. Remove any slide from the slide holder.
2. Close the GenePix Pro Software.
3. Click Start > Programs > Molecular Devices >
GenePix Pro > GenePix Utilities.
The GenePix Utilities window appears
4. Click Park Scanner for Shipping.
A message box appears informing you that the scanner has
been successfully parked.
CAUTION! Always turn off power to the scanner using the power switch.
Do not turn off the power by unplugging the mains power cable from
the power outlet.
5. Turn off the power switch on the scanner.
6. Unplug the mains power cable from the back of the scanner and
the lab’s power outlet.
CAUTION! Never unplug the USB cable unless the scanner has been
turned off and the mains power cable disconnected.
Tip! Do not turn on the power switch after parking the scanner.
GenePix.book Page 26 Friday, October 22, 2010 2:59 PM