Molecular Devices GenePix 4300A, User Manual

Page: 25 / 36

0112-0173 B 25
3
Maintenance & Troubleshooting
The GenePix
®
4300A/4400A Microarray Scanner requires very little
maintenance. The procedures are limited to moving the scanner, and
installing additional filters.
CAUTION! Do not touch or loosen any screws or parts other than those
specifically described in the maintenance procedures. Doing so may
cause misalignment, and void the scanner warranty.
WARNING! Biohazardous Material. It is your responsibility to
decontaminate the scanner, as well as any accessories, before
requesting service from Molecular Devices representatives, or
before returning the scanner or any components to Molecular
Devices.
WARNING! Biohazardous Material. Never perform any
maintenance procedures on the scanner in an environment
where potentially damaging gases or liquids are present.
WARNING! Shock Hazard. Do not remove the protective
enclosure or any covers marked with the high-voltage warning
symbol.
WARNING! Shock Hazard. Always turn the power switch off
and disconnect the mains power cable before performing any
maintenance procedures.
WARNING! The scanner weighs approximately 99 pounds (45
kg). To avoid potential injury, a minimum of two people are
needed to lift the scanner.
GenePix.book Page 25 Friday, October 22, 2010 2:59 PM