manualshive.com logo in svg

MOIXA Smart Battery, Maintenance Manual

Share
Download
MOIXA Smart Battery Maintenance Manual Download Page 40

DC READY

®

,  MOIXA

®

 are registered trademarks, logos, illustrations are property of  

Moixa Energy Holdings Ltd. Registered in England and Wales. © Moixa Technology Ltd 2016.

[email protected] 

www.moixa.com 

Moixa Technology Ltd,  

One Fellmongers Path,  

London SE1 3LY

40 |

4.

 Select the Moixa Wi-Fi network from your Wi-Fi network chooser. This will be in 

the format maslow-UnitSerialNo.

5.

 When prompted for a password enter “MaslowPass”. 

6.

 Once your device has connected to the Moixa Smart Battery, open a web 

browser and navigate to the following page: http://10.74.8.254/

7.

 In the page that is displayed enter the SSID (In this case, “BT-VM-SK123’’) and 

password (in this case, “abc123xyz’’) of the wi-fi network that you wish the Moixa 

Smart Battery to connect to then click Set.

8. 

A confirmatory message will be displayed and your device will be disconnected 

from the Moixa Smart Battery. 
4.

8.

5.

6. / 7.

connect

 

battery

 

to

 

wifi

Summary of Contents for Smart Battery


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands