Mohr CT100 Operator'S Manual Download Page 40

Page: 40 / 121

Operating Instructions

Hardware info

Display hardware information.

Usage

Display usage stats (hours, scans, storage, etc.).

Time

This menu allows a user to change time and date settings.

Set time zone

Change the time zone. Requires a reboot for changes to take effect.

Daylight savings on/off

Set whether the CT100 will automatically adjust for daylight savings time on the
appropriate dates. Requires a reboot for changes to take effect.

Time/Date

Set the current date and time.

Math

The

Math

menu contains frequently used mathematical operations. The items in this menu

are identical to those found in the

Math

submenu of the

Scan

Set base (1)

Sets the currently selected trace as the base trace, used by other actions in the

Math

menu that operate on more than one trace, such as

Difference

Difference

Creates a new trace that is the difference between the base trace (see

Set base

above)

and the currently selected trace.

1st derivative

Creates a new trace that is the first derivative of the currently selected trace.

FFT

Creates a new trace that is the Fast Fourier Transform of the currently selected trace,
using the data that lies between the cursors. The FFT is transformed using settings
from the

FFT settings

submenu.

FFT settings

Window

Selects the data window that is applied after padding the data but before the Fast
Fourier Transform.

Size

Selects the size of the data window. The data bounded by the cursors is padded
with stationary values to fill the window size.

Mohr CT100 / CT100HF Operator's Manual

Summary of Contents for CT100


























































































































Search results

Summary of Contents for CT100

Reviews:

Related manuals for CT100

Brands by name

Popular brands

Mohr CT100, Operator'S Manual

Search results

Summary of Contents for CT100

Reviews:

Related manuals for CT100

Brands by name

Popular brands