10
ENG
System Extensions
System Connectors (option)
SV
System connectors serve for connecting two system convector
troughs, or two convector parts, respectively.
Push the connectors in even distances into the grooves of the convector
trough. Pull together the convector troughs and fix the connection by me-
ans of stud screws M6 and an allen key of size 3.
Mitre Fit
GPS
System convector parts with mitre fit are delivered ready-to-
plug-in; they are also installed with system connectors.
Installation
Electrical Connection
Note for electrical connection
there are 3 heating element types:
• 220 W
500 mm length
• 470 W
1000 mm length
• 570 W
1250 mm length
All ESK are equipped with the ELS 1000 for the electrical connection.
Through this controller, the resistance and control current are, in relation
to the connection conditions and power, virtually independent. With an AR
40xx, a total of 15 ELS 1000 can be active.
Electrical voltage! Danger to life!
Disconnect the entire system power
to work on the Electric System Convector!
