17
ENG
8-D24-53-031.12 ESK 180-110
Maintenance
Danger of injuries!
Do not forget to
secure the Designer grille roll!
3. Clean the Heat Exchanger
Remove the Designer Grille. To clean the hand-accessible area of the heat
exchanger, we recommend a dry dust cloth or broom. Hard to reach places
can be cleaned with a vacuum cleaner equipped with a soft brush nozzle or
a soft brush. Replace the filter, if needed, and the Designer Grille.
Manual storage
Please give this manual to the later users as a document for revision in the
scope of commissioning and hand over of the equipment, because it inclu-
des important notes on maintenance and care.
Technical Support
Technical support
Mo to Thu:
7:30 to 17:00 Uhr
Fr:
7:30 to 15:00 Uhr
Service-Telephone: +49 (0) 53 41 8475 - 470
Service-Fax:
+49 (0) 53 41 8475 - 999
E-Mail:
Mailing Address
Möhlenhoff Wärmetechnik GmbH
Techniscal Support
Museumstraße 54a
DE 38229 Salzgitter
Germany
All trades participating on the installation, connection and com-
missioning of the ESK need information from this manual in order
to perform their work. Please ensure that the manual is disclosed
correspondingly after the termination of the individual parts of the
work.
Copyright
This manual is protected by copyright. All rights reserved. It may not be
copied, reproduced, abbreviated or transmitted, neither in whole nor in
parts, in any form, neither mechanically nor electronically, without the pre-
vious consent of the manufacturer. The basing information was evaluated
thoroughly and arranged to the best knowledge.
© Copyright 2009
Declaration of Conformity
The manufacturer declares in sole responsibility that the product
ESK complies with all applicable requirements of the guidelines
2004/108/EG and 2006/95/EG.
The following standards were used for the assessment:
• EN 60335-1:2002
• EN 60335-2-30:2003+A1:2004
