14
ENG
Designer Grille Roll
Designer grille roll protector
Fit the designer grille roll into the convector trough in a way that a space
of the size of a grille rod is over the recess in the side parts of the convector.
Insert the protector in a way that its medium part is located above the grille
rod connectors (gummed step-on acoustic insulation) and its exterior fixing
lugs are located below the grille rod connectors.
Danger of jamming!
Always fix
the designer grille roll protector
above the convector fan. It serves as
a protection against reaching into
the fan.
Insert the designer grille roll into the system convector trough. Using an Allen
key (size 3), push the fixing screws to the outside, and thus, the fixing lugs
into the recesses of the side parts. Finally, tighten the screws.
Installation
