manualshive.com logo in svg

MOGAS ISOLATOR 2.0, Installation, Operation And Maintenance Manual

Share
Download
MOGAS ISOLATOR 2.0 Installation, Operation And Maintenance Manual Download Page 23

ESI-6149   © Copyright 01/22/2018 MOGAS Industries, Inc.  

 www.mogas.com

23

REMOVE STOP PLATE

Use a flathead screwdriver to pry the retaining ring 

28 

up and off the stem . Then, slide the stop plate 

63 

up 

and off the stem .

REMOVE GLAND NUTS

Remove the packing gland nuts 

15

 and spring discs 

(live loading) 

07C

 . Remove flat washers 

07D

 if 

present .

Note: 

ISOLATOR 2.0 models 3-inch and larger will not have flat washers.

REMOVE GLAND FLANGE

Lift upward to remove the packing gland flange 

07

 .

REMOVE GLAND STUDS

Remove gland studs 

12

 from body 

02

 .

REMOVE GLAND FLANGE THRUSTER

Lift upward to remove the packing gland flange 
thruster 

07B

 .

REMOVE STEM

Using a hammer and brass or aluminum rod, or 
wooden block, tap stem 

05

 into body cavity .

Carefully remove stem through access port or body 
cavity .

 19

Disassembly

28

63

15

07C

07D

07

07B

12

05

05

02

02

 14

 15

 16

 18

 17

Summary of Contents for ISOLATOR 2.0





































Reviews:

No comments

Brands by name

Popular brands

Load more brands