manualshive.com logo in svg

MOGAS ISOLATOR 2.0, Installation, Operation And Maintenance Manual

Share
Download
MOGAS ISOLATOR 2.0 Installation, Operation And Maintenance Manual Download Page 18

ESI-6149   © Copyright 01/22/2018 MOGAS Industries, Inc.   

www.mogas.com

18

INSTALL PACKING RING SET

Note:

Applying a lubricant to packing ring surfaces may ease the installation 
process.

Install the rings one at a time (one anti-extrusion ring 

09B

 first, then two stem packing rings 

09A

, then the 

final anti-extrusion ring 

09B

) using the gland flange 

thruster 

07B

 as a packing tool to stuff each packing 

ring all the way down against the previous ring . 

CHECK POCKET DEPTH 

Before installing the final anti-extrusion ring 

09B,

 

ensure there is enough depth for the anti-extrusion 
ring to fit flush in the pocket . 

INSTALL FINAL ANTI-EXTRUSION RING

If there is enough depth for the final anti-extrusion ring 
to fit flush in the pocket, install the anti-extrusion ring 

09B

 .

If there is not enough depth for the final anti-extrusion 
ring to fit flush in the pocket, the packing rings must 
be compressed .

To compress packing rings, temporarily install the 
gland flange thruster 

07B

 over stem 

05

, then the 

gland flange 

07

 and gland nuts 

15

 over gland studs 

12

 . (If necessary, install gland studs, using anti-seize 

compound .) Tighten all nuts 

evenly

 until there is 

enough depth for the final anti-extrusion ring 

09B

 to 

fit flush into the pocket . 

Once this is accomplished, remove the gland nuts 

15

, 

gland flange 

07

 and gland flange thruster 

07B

 .

Install the final anti-extrusion ring 

09B

 .

09B

07B

12

05

07

15

09B

09A

Replace Stem Packing

 9

 10

Summary of Contents for ISOLATOR 2.0





































Reviews:

No comments

Brands by name

Popular brands

Load more brands