Moeller SmartWire SWIRE-GW-DP, Hardware, Engineering And Function Description, Page: 10 / 49

About the PROFIBUS-DP
gateway SWIRE-GW-DP
6
11/06 AWB1251-1590GB
Design of the
SWIRE-GW-DP
Figure 2: Device view
a Connection to PROFIBUS_DP, 9-pole SUB-D socket,
a page 12
b Configuration button, a page 19
c 4 green status LEDs, a page 20
d Gateway power supply terminal, a page 11
e Contactor coil (aux.) power supply terminal, a page 11
f Socket Out for SmartWire connection cable, a page 10
g DIP switch for the address setting of the PROFIBUS-DP module,
a page 9
Description of function The gateway SWIRE-GW-DP enables the conection of the
SmartWire system to a PROFIBUS-DP communication
network. The SmartWire system can consist of a line with a
maximum of 16 slaves. The slaves can be eithar SmartWire
modules for DILM or SmartWire I/O modules. The following
data can be transmitted by the selection of the
corresponding SmartWire modules:
d
e
c
b
a
f g